Technical Specification
General Purpose compounds
| Properties | Application | Hardness | Specific Gravity | Thermal Stability | Tensile Strength | Elongation | Processing Condition |
|---|---|---|---|---|---|---|---|
| Units | A | Minutes | N/mm2 | % | °C | ||
| Grade | |||||||
| JJ50 | Molding components | 55 ± 2 | 1.25±0.02 | 20 | >9 | >300 | 125-150 |
| JJ55 | Molding components | 50 ± 2 | 1.28±0.02 | 20 | >9 | >300 | 125-155 |
| JJ60 | Molding components | 60 ± 2 | 1.22±0.02 | 30 | >9 | >300 | 130-160 |
| JJ65 | Molding components | 65 ± 2 | 1.25±0.02 | 35 | >9 | >300 | 130-160 |
| JJ80 | Extrusion Tubes and Sleeves | 80 ± 2 | 1.30±0.02 | 80 | >9 | >300 | 145-165 |
| JJ IP60 | Plugs, connectors | 75 ± 2 | 1.40±0.02 | 80 | >9 | >250 | 140-160 |
| JJ IP50 | Plugs, molding components | 80 ± 2 | 1.39±0.02 | 80 | >9 | >250 | 140-165 |
| JJ IP40 | Plugs, Grommets | 90 ± 2 | 1.35±0.02 | 65 | >9 | >200 | 150-180 |
| JJ FG62 | Refrigeration Gasket | 62 ± 2 | 1.23±0.02 | 30 | >9 | >300 | 125-160 |
Wire& Cable compound( Insulation )
| Grade Name | JI 11 | JI 12 | JI 13 | JI 21 | JI 22 | JI 31 | JI 32 |
| Classification as per IS 5831 | A | A | A | B | B | C | C |
| Maximum Operating Temperature, °C | 70 | 70 | 70 | 105 | 105 | 125 | 125 |
| Specific Gravity | 1.46 ± 0.2 | 1.40± 0.2 | 1.38± 0.2 | 1.38± 0.2 | 1.35± 0.2 | 1.38± 0.2 | 1.38± 0.2 |
| Hardness, Shore A | 90±2 | 90±2 | 88±2 | 88±2 | 93±2 | 88±2 | 90±2 |
| Thermal Stability @ 200°C | 110 | 120 | 80 | 120 | 120 | 150 | 200 |
| Tensile Strength, N/mm² | >12.5 | >12.5 | >12.5 | >12.5 | >12.5 | >12.5 | >12.5 |
| Elongation at Break, % | >250 | >250 | >300 | >250 | >250 | >250 | >250 |
| Aging Temperature, °C | 80 | 80 | 80 | 100 | 100 | 135 | 135 |
| Duration of Aging, Days | 7 | 7 | 7 | 7 | 7 | 7 | 7 |
| Variation of T.S. % (±) | 20 | 20 | 20 | 25 | 25 | 25 | 25 |
| Variation of E.B. % (±) | 20 | 20 | 20 | 25 | 25 | 25 | 25 |
| Loss of Mass, mg/cm² Max | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
Wire & Cable compound( Sheathing )
| Grade Name | JS 11 | JS 12 | JS 13 | JS 21 | JS 22 | JS 1FR | JS 2FR |
| Classification as per IS 5831 | ST - 1 | ST - 1 | ST - 1 | ST - 2 | ST - 2 | ST – 1 FR | ST - 2 FR |
| Maximum Operating Temperature, °C | 70 | 70 | 70 | 90 | 90 | 70 | 90 |
| Specific Gravity | 1.56 ± 0.2 | 1.47± 0.2 | 1.44± 0.2 | 1.48± 0.2 | 1.47± 0.2 | 1.50± 0.2 | 1.50± 0.2 |
| Hardness, Shore A | 90±2 | 86±2 | 80±2 | 90±2 | 88±2 | 90±2 | 90±2 |
| Thermal Stability @ 200°C | 60 | 60 | 80 | 120 | 100 | 90 | 120 |
| Tensile Strength, N/mm² | >12.5 | >12.5 | >12.5 | >12.5 | >12.5 | >12.5 | >12.5 |
| Elongation at Break, % | >200 | >250 | >250 | >250 | >250 | >250 | >250 |
| Aging Temperature, °C | 80 | 80 | 80 | 100 | 100 | 80 | 100 |
| Duration of Aging, Days | 7 | 7 | 7 | 7 | 7 | 7 | 7 |
| Variation of T.S. % (±) | 20 | 20 | 20 | 25 | 25 | 25 | 25 |
| Variation of E.B. % (±) | 20 | 20 | 20 | 25 | 25 | 25 | 25 |
| Loss of Mass, mg/cm² Max | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| LOI min | 30 | 30 | |||||
| Temperature Index,°C min | 250 | 250 |
The above information is believed to be reliable and is given in the good faith but without warrantyand the user should test the product to ascertain.